pdf
| Model | Gel width X Gel length | Casting Stand | Migration | Cat No. |
| Midikin | 16.5 x 16 cm | No | Uni-directional | TVMDR-US1616 # |
| Midikin | 16.5 x 16 cm | No | Bi-directional | TVMDR-BS1616 |
| No of wells | Approx loading vol. in µL/well | Well width (in mm) | Well depth (in mm) | Comb thickness (in mm) | Material | Cat No. | Qty. | Image |
| 20 | 75 µL | Well width | 15 | 1 | PTFE | TVMDS-CMF201 | 1 | Image |
| 20 | 112 µL | Well width | 15 | 1.5 | PTFE | TVMDS-CMF202 | 1 | Image |
| 26 | 45 µL | Well width | 15 | 1 | PTFE | TVMDS-CMF261 | 1 | Image |
| 26 | 66 µL | Well width | 15 | 1.5 | PTFE | TVMDS-CMF262 | 1 | Image |
| Type | For use with | Spacer width (in cm) |
Spacer length (in cm) |
Spacer thickness (in mm) |
Material | Cat No. | Qty. | Image |
| Slotted | In situ casting | 2 | 19.5 | 1 | PMMA | TVMDS-SPS191 | 1 pair | Image |
| Slotted | In situ casting | 2 | 19.5 | 1.5 | PMMA | TVMDS-SPS192 | 1 pair | Image |
| Category | Type | For use with | Plate size/ gel size W x L (cm) |
Plate thick-ness (mm) |
Material | Cat No. | Qty. | Image |
| Notched & Rectangular | Square bottom | In situ casting with slotted spacers |
21.5 x 17/ 16.5 x 16 |
2 | Glass | TVMDS-GNRS21 | 1 set | Image |
| Rectangular | Square bottom | In situ casting with slotted spacers |
21.5 x 17/ 16.5 x 16 |
2 | Glass | TVMDS-G0RS21 | 1 pair | Image |
| Type | For use with | Number of gel cast | Thick-ness of gel cast | Tape free sealing | Agarose free sealing | Cat No. | Qty. | Image |
| Variable gel no., variable thickness |
with binder clips & agarose for sealing | 1 or 2 | 1/ 1.5 mm | Yes | No | TVMDS-CS0BC0 | 1 unit | Image |
| Item | Description | For use with | Cat No. | Qty. | Image |
| Glass plate stand | Stand for three plates | All Midikins | TVMDS-GPS003 | 1 unit | Image |
| Gel-sandwich opener | To separate out the gel cassette after the gel run | All Midikins | TVC0S-GS0W01 | 1 unit | Image |
| Agarose dispenser for 1 mm spacer | For filling slot in slotted spacers of 1 mm | Midikin | TVC0S-ADS001 | 1 unit | Image |
| Agarose dispenser for 1.5 mm spacer | For filling slot in slotted spacers of 1.5 mm | Midikin | TVC0S-ADS002 | 1 unit | Image |
| Electrical cords | With male & female connectors (to connect to all standard power supplies) | All Midikins | TCC0S-CRD044 | 1 pair | Image |
| Gradient Mixer | Triple barrel & plunging stopper. Vol per chamber 14 mL. | All Midikins | TVC0S-GM1414 | 1 unit | Image |
| Levelling table | Penta-legged with spirit level (21 x 21 cm) | All Midikins | TCC0S-LT2121 | 1 unit | Image |
| Part | Description | For use with | Cat No. | Qty. | Image |
| Clamps 17 (l) cm with screws | Replacement part for Midikin | All Midikins | TVMDS-CL0170 | 1 pair | Image |
| Screws for clamps & CEU | Replacement part for Midikin | All Midikins | TVC0S-SC0202 | 2 pcs of each | Image |
| Resilient silicone gasket(tube type) for CEU | Replacement part for Midikin | All Midikins | TVMDS-SGCEUT | 1 unit | Image |
| Resilient silicone gasket (rod type) for CEU | Replacement part for Midikin | All Midikins | TVMDS-SGCEUR | 1 unit | Image |
| Midikin, CEU | Replacement part for Midikin | Midikin of Cat nos. TVMDR-US1616 |
TVMDS-CEUU01 | 1 unit | Image |
| Midikin-BD, CEU | Replacement part for Midikin-BD | Midikin-BD of Cat nos. TVMDR-BS1616 |
TVMDS-CEUB02 | 1 unit | Image |
| Midikin, Tank | Replacement part for Midikin | Midikin of Cat nos. TVMDR-US1616 |
TVMDS-TNKU01 | 1 unit | Image |
| Midikin-BD, Tank | Replacement part for Midikin-BD | Midikin of Cat nos. TVMDR-BS1616 |
TVMDS-TNKB02 | 1 unit | Image |